When building bricks, there are various kinds of brick joint you may use each with its own unique function.

Flush joints

The mortar is cut flush to the outer surface of the bricks together with the trowel. Bricks which don’t own a level face will probably be difficult to flush. You can browse https://sebrickandblock.com.au/ to know more about bricklaying.

Image result for Building With Bricks - Joint Types

Rolled joints

A round bar is used to press at the mortar. Many bricklayers use a brief length of garden hose to perform this sort of joint but that could lead to a rough end to the mortar. A steel instrument provides an extremely smooth finish.

Weather joints

This sort of joint allows rainwater to trickle down the surface of the bricks and slow water absorption.

Struck joint

This is constructed using the trowel and just flat joints have been struck.

Heavy bagging

The wall is gently coated with water and invisibly using a hessian bag where mortar is put. This may leave 1 or 2mm of mortar on the surface of the wall. Having a thin use of mortar, swirls or alternative patterns can be gained.

V joint

A distinctive square-edged instrument is used to rake out mortar exiting a V-shape.

Ranked joint

Mortar is raked out using an instrument to a maximum thickness of 10mm.

It is significant that mortar joints have been completed evenly throughout. Tooled joints efficiently compress the mortar and allow it to be additional weatherproof.

Rolled joints are not as inclined to allow the mortar to split as raked joints, thus rendering them suitable for harsh coastal states where salt induces the mortar to crack down.